Applies to:
ViewBoard IFP52-1A/1B Series



Hardware Required:

USB Flash Drive (FAT32 formatted)  How to format a USB Drive to FAT32


 

Download firmware pack

1.  Proceed to the Download section of the device's product page to download the firmware file.

 


2.  Extract the update file, mt9950_cn-ota_update.zip, and copy the file to the root directory of the USB flash drive

3.  Insert the USB drive into the USB port located on the side of the ViewBoard



4.  Go to Settings > System > System Update.


5.  Under Local Update, click BROWSE


6.  Select the USB flash drive



7.  Select the firmware file to start the update process


Wait for the upgrade to complete and ViewBoard to reboot.

Update will take approximately 5 minutes to complete.

IMPORTANT: Do not power off device during update as it may result in a non-functioning unit 


 

 

8.  Once the unit reboot and returns to the ViewSonic Home screen, verify the unit's firmware version in the About Device. Go to Settings > System > About Device


For additional questions, please contact ViewSonic's Support by submitting a support ticket HERE or by Phone: US: 800-688-6688, CAN: 866-463-4775. ViewSonic’s call center hours: M-F, 6 AM - 6 PM PST.