Applies to:

  • TRS10 (MPC310-W31-TU and MRC1010-TN)
  • TRS10-UB (UMB202, MPC310-W31-TU and MRC1010-TN)

IMPORTANT: 
An active internet connection is required before turning on the Conferencing PC. Please make sure the following connections are made before activating and using your TRS10 or TRS10-UB.


Pre-Installation Checklist

Before you begin:

  1. Check Inventory: Ensure you have all the necessary components:
    • MPC310-W31-TU Conferencing PC
    • MRC1010-TN Touch Console
    • USB Type C cable
    • RJ-45 Ethernet (LAN) cable
    • Power cord
  2. Verify Internet Access: Confirm that a reliable internet connection is available at the installation site.
    • Access to the Internet 

Instructions:

  1.  Connect the USB Type C cable from the MPC310-W31-TU Conferencing PC to the 

     MRC1010-TN Touch Console.


     
  2.  Connect the MPC-W31-TU Ethernet (RJ-45) LAN cable from the Conferencing PC to the 

     network connected to the Internet.



  3. Turn on the Conferencing PC. 
    IMPORTANT: An active internet connection is required before turning on the Conferencing PC. Please make sure that all necessary connections are made before activating and using your TRS10 or TRS10-UB system.



Support and Troubleshooting:

  • If you encounter issues during installation, double-check cable connections, internet access, and ensure power outlets are working.

  • For further assistance, refer to the product’s support documentation or contact ViewSonic’s technical support team. 




For additional questions, please contact ViewSonic's Support by submitting a support ticket HERE or by Phone: US: 800-688-6688, CAN: 866-463-4775. ViewSonic’s call center hours: M-F, 6 AM - 6 PM PST.