General Questions
Troubleshooting No Power/No Video Issues: Disconnect and securely reconnect the Power Cable. Then retry the Power Switch. Try using another Power Cable. ...
Wed, 9 Jan, 2019 at 3:14 AM
Message: Set the resolution higher. Test the projector on a different computer to isolate the problem. Please follow the instructions below on how to ...
Wed, 9 Jan, 2019 at 3:14 AM
The projector's image size is determined by the distance between the projector itself and the screen. Moving the projector closer to the screen will m...
Wed, 9 Jan, 2019 at 3:14 AM
Open the projector Menu and go to System Setting: Basic> Projector Position and choose one of the four available options: Front Table Rear Table Ceil...
Wed, 9 Jan, 2019 at 3:14 AM
To clean the projector lens, do the following: Apply a non-abrasive camera lens cleaner to a soft, lint-free cloth. Do NOT spray the cleaner directly onto...
Wed, 9 Jan, 2019 at 3:14 AM
ViewSonic projectors should work fine with presentations like Powerpoint. The projector should display exactly what the computer tells it to do. If the p...
Wed, 9 Jan, 2019 at 3:14 AM
Please check following items: Disconnect and reconnect the audio source. If you have a projector and are using the RF input, disconnect and reconnect the ...
Wed, 9 Jan, 2019 at 3:14 AM
Verify adapter plugged into a wall outlet Make sure the AC adapter is firmly and securely plugged into the wall outlet. Although it may sound obvious, th...
Wed, 9 Jan, 2019 at 3:14 AM
Hardware requirements: 3D ready projector 3D Blu-Ray player 3D content Active 3D glasses 144Hz High speed HDMI cables 1. The 3D settings on Viewsonic ...
Wed, 9 Jan, 2019 at 3:14 AM
1. Press the menu button on the projector or the remote control and then navigate to the System Settings Advanced tab. 2. select to restore factory defaul...
Wed, 9 Jan, 2019 at 3:14 AM