Interactive Flat Panel
You can disable the “Touch and Annotate from Mobile” function in setting.
Wed, 9 Jan, 2019 at 3:14 AM
It's a software limitation from MacOS. Please upgrade MacOS to v10.13 or later to solve the issue.
Wed, 9 Jan, 2019 at 3:14 AM
vBoard will be activated automatically while Internet in connected. Please make sure your IFP display is well connected to Internet.
Wed, 9 Jan, 2019 at 3:14 AM
Both touch module and remote control in IFP7550 are based on IR technology with transmitter and receiver. The IR wave length of touch module is 850nm and 9...
Wed, 9 Jan, 2019 at 3:14 AM
Check connection and ports, if connected to VGA, USB will be from PC to Touch 1. Disconnect and reconnect the USB cable and make sure that Windows loads ap...
Wed, 9 Jan, 2019 at 3:15 AM
The default time zone is +8 which can be changed at the initial setting stage by Set up wizard of ViewBoard Launcher. It will be auto sync-up later with in...
Wed, 9 Jan, 2019 at 3:15 AM
No, CDE7061T VGA Out only bypass the signal from VGA in 1 and VGA in 2, the annotation won’t be shown on second display.
Wed, 9 Jan, 2019 at 3:15 AM
Windows 10 1. Connect the external displays with video cables and USB cables from the PC. The USB cable must be connected to enable touch functionality. ...
Wed, 20 Jul, 2022 at 1:07 PM
Yes, the HDMI out on the IFP7550 will show the annotations on the second display.
Wed, 9 Jan, 2019 at 3:15 AM
You need to upgrade firmware to 20180403 or later version, you can download firmware from ViewSonic website. After done the firmware upgrade, you need to pr...
Wed, 9 Jan, 2019 at 3:15 AM