Here’re major steps to set up video wall in portrait position for your reference.


1. Set up  monitor ID in OSD menu as 1~4 prior to mounting monitors.

 

2. Connect  IR sensor cable to monitor 1.

 

3. Connect  the PC to monitor 1 with DP cable firstly for easy setup & adjustment  afterwards.

 

4. Mounting  monitor 1/2/3/4 in portrait position in sequence as below (P4~P5) (monitor 1  may be mounted prior to step 3 depending on site conditions).

 

5. Connect  monitor 1/2/3/4 in daisy chain with DP cable (P13~P14).

 

6. Enable Tiling and adjust position in OSD menu. For more details, please refer to the attached user guide (P21~P22).