How To's

CDE5510/6510 Firmware (F/W) Update Procedure
1. Copy the Firmware (F/W) image file to a USB storage device's root directory. NOTE: the USB storage device must be formatted with FAT32. 2. T...
Thu, 30 Jan, 2020 at 12:56 PM
Firmware Flash Instructions CDE30 Series
A USB flash is used when an OTA (over-the-air) update is not a viable option or a complete reflash of the firmware is required.  If you would like to kn...
Thu, 1 Feb, 2024 at 12:00 PM
Firmware Flash Instructions CDE12 Series
A USB flash is used when an OTA (over-the-air) update is not a viable option or a complete reflash of the firmware is required.  If you would like to kn...
Fri, 2 Feb, 2024 at 1:55 PM
Firmware Pack installation instructions for CDE12 Series
Applies to: ViewBoard CDE12 Series Hardware Required: USB Flash Drive (FAT32 formatted)  How to format a USB Drive to FAT32 Identifying the correct...
Fri, 2 Feb, 2024 at 2:27 PM
Firmware Pack installation instructions for CDE30 Series
Applies to: ViewBoard CDE30 Series Hardware Required: USB Flash Drive (FAT32 formatted)  How to format a USB Drive to FAT32 Identifying the correct ...
Thu, 7 Nov, 2024 at 2:27 PM
CDE30 Series Crestron Connected Settings
To access the Crestron Control settings you will need to open the application manually.  Starting at the home screen select the Settings Icon.  ...
Fri, 19 Jul, 2024 at 12:32 PM
ViewSonic CDE30 Series Power Save Modes: Which Mode Should I Use?
There are four Power Save modes to choose from and knowing which one to use depends on the application. For this scenario we will cover digital signage, inf...
Thu, 29 Aug, 2024 at 4:36 PM
How to wake up CDE5561T by HDMI connection when PC resumes from standby?
Please follow below instruction to turn on the function of "Wake on activate source" under Debug Menu. Press the buttons “Input 991” on RCU to...
Wed, 9 Jan, 2019 at 3:14 AM
Touch not working on CDE7051-TL with external device, how can I do?
Check connection and ports, if connected to VGA, USB will be from PC to Touch 1. Disconnect and reconnect the USB cable and make sure that Windows loads ap...
Wed, 9 Jan, 2019 at 3:15 AM
Can CDE7061T VGA out show the annotation layer to second display?
No, CDE7061T VGA Out only bypass the signal from VGA in 1 and VGA in 2, the annotation won’t be shown on second display.
Wed, 9 Jan, 2019 at 3:15 AM