How To's
Refer to the following article to enable special button lock options. The buttons can be locked by pressing the following front panel buttons in sequ...
Sun, 20 Oct, 2019 at 5:08 PM
Applies To: IFP50-3 Series ViewBoards IFP52-1C Series ViewBoards Issue Description When connecting the Line Out to an external speaker or audio...
Fri, 27 Jan, 2023 at 7:21 AM
If a remote control is not available then you can enter the debug menu on an IFP unit using the step below. 1. Open IFP's Settings 2. Tap Sys...
Fri, 9 Jun, 2023 at 9:13 AM
Yes, you can follow below steps: 1. Under Action Center, click Connect button. 2. Click the name of the device you're trying to project. 3. Check the...
Wed, 9 Jan, 2019 at 3:15 AM
A USB firmware flash is used when the OTA (over-the-air) update is not a viable option or a complete reflash of the firmware is required. If you would li...
Fri, 20 Dec, 2024 at 1:13 PM
Applies to: VPC35-W53-G1 VPC37-W53-G1 VPC37-W55-G1 Other Models experiencing a default disabled WIFI module. Instructions: Below are three effec...
Wed, 15 Jan, 2025 at 4:34 PM
Issue: With the latest firmware version 20240429, the Viewboard's OPS 5K detect setting is defaulted to 5K, causing a "No Signal" issue when u...
Tue, 13 Aug, 2024 at 3:53 PM
Applies To: IFP50-5 Viewboard Series IMPORTANT NOTES - Ensure the display has a stable internet connection.
- Before upgrading to Android 13, please ...
Thu, 6 Feb, 2025 at 4:31 PM
A USB firmware flash is used when the OTA (over-the-air) update is not a viable option or a complete reflash of the firmware is required. If you would li...
Fri, 20 Dec, 2024 at 1:33 PM
Applies to: CDE Displays IFP Displays If the display's embedded player was disabled and wanted to re-enable it, please follow the instructions b...
Mon, 25 Nov, 2024 at 2:05 PM