ViewSonic Customer Care

Applies to: ViewBoard IFP52-1C Series Hardware Required: USB Flash Drive (FAT32 formatted)  How to format a USB Drive to FAT32   Download firmware ...

 A USB firmware flash is used when the OTA (over-the-air) update is not a viable option or a complete reflash of the firmware is required.  If you would li...

A USB firmware flash is used when the OTA (over-the-air) update is not a viable option or a complete reflash of the firmware is required.  If you would li...

A USB firmware flash is used when the OTA (over-the-air) update is not a viable option or a complete reflash of the firmware is required.  If you would li...

1. Purchase the product key online or via Microsoft distributor. 2. Once you have the key, click “Start > Settings > Update & security > Activ...

Please follow the instruction in UG to connect IFP7550 to a router or AP by LAN cable. Make sure networking settings such as IP address is correctly set...

You can remotely control IFP7550 by RS232 cable and Viewsonic vController software which is available to download in below link. http://www.viewsonicglobal...

Please configure the networks firewall settings to grant pass-through authentication to IFP7550.

Please connect an audio cable from AUDIO OUT connector on IFP7550 to external amplifier or active speaker with power adapter. For more details, please r...

Please follow below instruction to modify system settings on your Chromebook. 1. Enter ‘about:flags’ to the address bar 2. Search ‘touch’ 3. Enable ‘...